Mishimoto Front-Mount Intercooler Kit Subaru WRX/STI 2002–2007
MMINT-WRX-01BK
Designed for applications that demand the greatest airflow and cooling capabilities, the Mishimoto WRX and STI Front-Mount Intercooler Kit will provide your Subaru with the ability to make the most horsepower and torque possible. This WRX and STI intercooler was designed with a large, 28 intercooler core that provides the maximum cooling capability without excessive pressure drops that will wear out any turbocharger over time. The intercooler features smooth cast end tanks that are CFD tested for maximum airflow with no sharp walls or bends from cut-and-weld end tanks that disrupt airflow. The intercooler provides the best airflow and heat exchange properties for those time attack laps, or a 10-second blast down the quarter mile.
The kit contains everything needed for a worry-free installation, including an application-specific crash bar that both supports the intercooler and mounts to existing points on the vehicle. No cutting or drilling is required to install the crash bar and intercooler. The kit also includes all necessary mounting brackets, including a resistor block relocation bracket to move the resistor block out of the way of the intercooler piping. All mounting brackets will come with applicable hardware, zip ties, and thermal wrap. The kit also includes every coupler and clamp needed for a clean install. For larger-than-stock turbos, Mishimoto has included a larger turbo hot-side pipe that will fit turbochargers with an outlet of 2–2.13. As an added bonus, we've engineered the Mishimoto Subaru WRX/STI Performance Air Intake as an additional option to work perfectly with this intercooler kit and provide a rich and aggressive intake tone.
Features:
- Fits the 2002–2007 Subaru WRX/STI
- Intercooler design optimized for maximum flow, and smooth cast end tanks allow the best possible airflow in and out of the intercooler
- Optimal core design for maximum cooling efficiency with minimal pressure drop
- Flow rated to approximately 600 whp/30 psi of turbo boost (See Tech Specs below)
- Includes all necessary hardware, brackets, and accessories
- Also fits right-hand drive models
- Available in Sleek Silver or Stealth Black
- Works with stock bypass valve or aftermarket blow-off valve
- Optional Subaru WRX/STI Performance Air Intake works perfectly with intercooler kit and provides a rich and aggressive intake tone
- Mishimoto Lifetime Warranty
Includes:
- (1) Bar-and-Plate Intercooler
- (1) Steel Crash Bar w/ Mounting Hardware
- (2) Hot-Side Intercooler Pipes
- (2) Cold-Side Intercooler Pipes
- (1) BPV Flange Adapter
- (1) Resistor Block Relocation Bracket w/ Mounting Hardware
- (2) Lower Intercooler Brackets w/ Mounting Hardware
- (1) Aluminum Overflow Can w/ Mounting Hardware
- (1) Turbo to Hot Pipe Coupler (for stock turbo)
- (1) Turbo to Hot Pipe Coupler (for aftermarket turbo)
- (1) 2.25" Straight Coupler
- (2) 2.75" Straight Couplers
- (1) 2.75" x 3.25" Long Straight Coupler
- (1) 2.00"-2.75" Transition Coupler
- (1) BPV Recirculation Hose
- (1) PCV hose
- (1) 2.00" T-bolt Clamp
- (4) 2.5" T-bolt Clamps
- (7) 3" T-bolt Clamps
- (1) 1.5" Worm Gear Clamp
- (1) Bypass Valve Gasket
- (1) Black Nylon Hose Fitting, 3/4" I.D.
- (1) Black Nylon Tee Hose Fitting, 3/4" I.D.
- (1) 12" of Thermal Wrap
Note: Reservoir tank may require modification for proper fitment Mishimoto recommends that this intercooler kit, with or without the optional air intake, is not used with the stock ECU programming. It is highly recommended that the customer is able to retune the vehicle's ECU after installing the intercooler kit. Power gains will vary depending on the size of the turbo, exhaust system, fuel system, and type of ECU tune that is applied to the vehicle. This kit is rated for approximately 700 whp, or 30 psi of turbo boost. Exceeding these horsepower or pressure limits may require a custom-sized front-mount intercooler. Also Included With Optional Air Intake Kit (1) Oiled Filter (1) Aluminum Intake Pipe (1) 2.75 Straight Coupler (1) 3 Worm-Gear Clamp (1) Black High-Temp Zip Ties Optional Air Intake Specs Pipe Diameter: 2.75 Pipe Material: Aluminum Oiled Filter: 38 g of oil on the filter Note: Filter re-oil is not included in the lifetime warranty. Turbo to Hot-Side Hose Specs (for Stock Turbo) 1.875 I.D. / 2.20 O.D. – On turbo outlet 5 hose thickness Withstands up to 400°F (204°C) temps Fits on turbos with 1.97 (50) maximum compressor outlet size Turbo To Hot-Side Hose Specs (for Aftermarket Turbo) 2.00 I.D. / 2.40 O.D. On turbo outlet 5 hose thickness Withstands up to 400°F (204°C) temps Fits on turbos with 2.25 (57) maximum compressor outlet size This intercooler kit cannot retain the use of your fog lights if equipped.
Review pages below for additional information:
