AEM Electronics Water / Methanol Injection Kit V2 (up to 35psi) w/out Tank - Universal - Dirty Racing Products
AEM Electronics Water / Methanol Injection Kit V2 (up to 35psi) w/out Tank - Universal - Dirty Racing Products
AEM Electronics Water / Methanol Injection Kit V2 (up to 35psi) w/out Tank - Universal - Dirty Racing Products
AEM Electronics Water / Methanol Injection Kit V2 (up to 35psi) w/out Tank - Universal - Dirty Racing Products
AEM Electronics Water / Methanol Injection Kit V2 (up to 35psi) w/out Tank - Universal - Dirty Racing Products
AEM Electronics Water / Methanol Injection Kit V2 (up to 35psi) w/out Tank - Universal - Dirty Racing Products
AEM Electronics Water / Methanol Injection Kit V2 (up to 35psi) w/out Tank - Universal - Dirty Racing Products
AEM Electronics Water / Methanol Injection Kit V2 (up to 35psi) w/out Tank - Universal - Dirty Racing Products

AEM Electronics Water / Methanol Injection Kit V2 (up to 35psi) w/out Tank

30-3302

Regular price$450.95
/
Shipping calculated at checkout.

Snap Finance - Apply Here

Increase Power, Reduce Air Inlet Temps and Suppress Detonation at all Boost Levels

These AEM Electronics water/methanol injection pump and jet kits are intended for those who don't have room to mount even a one gallon tank, resulting in the use of the factory washer bottle.

The AEM Water Injection Kit is a safe and economical way to reduce air inlet temperatures to increase boost pressure for more power. Lower air inlet temperatures allow users to advance timing without having to run higher-octane fuel. This is the most complete kit available on the market straight out of the box- no additional parts required.

Water/methanol injection for forced induction (turbocharged or supercharged) gas-powered race engines is a proven means for effectively reducing engine inlet air temperatures and suppressing harmful detonation. This allows racers to reliably increase boost and advance ignition timing—without using high-octane racing fuel—for power gains of up to 20%. AEM’s Water Injection Kits utilize robust hardware and deliver more advanced features than any other comparably priced water/methanol injection system.

Note: FOR OPTIMUM RESULTS, ALL WATER/METHANOL INJECTION SYSTEMS AND FLOW GAUGES SHOULD BE RUN WITH AN WMI INLINE FILTER (PN 30-3003). For additional insurance against unintended flow, particularly when the pump and tank must be installed higher than the injections nozzle, we recommend adding our optional High-Flow Low-Current WMI Solenoid (PN 30-3326).

Includes:

  • Check valve integrated into the nozzle that prevents unintended fluid flow
  • Boost referenced progressive controller
  • One injector and three nozzles to cover a wide range of horsepower levels
  • High-pressure 200 psi recirculation-style pump
  • LED dash light for system status
  • 20 ft. of injection tubing

Features

  • Robust, Easy to Use Controller Designs
  • Innovative Injector Design Delivers Faster Cooling with Less Fluid Used
  • Heavy-Duty Waterproof High Pressure Injection Pump - Safe for Engine Bay/Frame Rail Mounting
  • Low-Profile 1.15 Gallon Tank
  • Simplified Wiring
  • Integrated Boost Safe Feature
  • Revised Flow Control Strategy for More Linear Fluid Delivery

Advantages:

  • Reduces Air Inlet Charge Temps
  • Reduces Detonation (Knock)
  • Reduces Carbon Deposits

 

Important Safety Notice Regarding Methanol

AEM Water/Methanol Injection Systems are chemically compatible with a mixture of water and methanol, which we strongly recommend does not exceed a concentration of more than 50% methanol. In addition to inherent dangers of using 100% methanol, doing so will damage the system's flow sensor and void the warranty on this component.

Methanol is a toxic and highly flammable chemical. 100% Methanol ignites easily and burns vigorously with an almost undetectable flame. Methanol can be absorbed through the skin and even small amounts can cause blindness or even death. Using this fluid at high pressures, without dilution, in an under-hood environment with nylon lines and push-to-connect fittings is very unsafe. The performance advantages of using greater than 50% methanol concentrations are small, if they exist at all. However, the safety issues are very real and far outweigh any perceived benefit of running high concentrations of methanol.

This item is non application specific. Please verify compatibility before purchase. May require some modification for proper installation.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.