My Cart

Close

IAG Stage 4 Tuff EJ25 Closed Deck Case w/ Plugs - 14mm H.S.M., Fire-Lock, (No Bore / Hone) For Subaru WRX, STI, FXT & LGT

$2,749.99
IAG-ENG-1825

Description

Please Note: Overbore must be performed (99.75mm is the preferred bore) before assembly!

IAG's Stage 4 Tuff Closed Deck EJ25 converted case halves are the most cost-effective short block modification for high horsepower Subaru WRX and STI's. IAG machines the case halves assembled together in our Haas VF-4SS CNC mill to accept the IAG CLOSED Deck Inserts that transform the block into a solid deck. The unique inserts feature small passages that allow needed coolant flow to the deck surface. The case halves are then CNC machined for our new Fire-Lock head gasket solution that is loosely derived from diesel technology where a counterbore step is machined around each cylinder bore allowing specially sized fire rings to drop into the machined area and head gasket bores. The Stage 4 Tuff case is then drilled and tapped to accept 14mm head studs that combined with the IAG Fire-Lock head gasket set greatly reduces head gasket failure during high cylinder pressure scenarios. IAG’s Closed Deck is suitable for street or race use and has been tested in vehicles producing 1000+ horsepower and over 55psi of boost.

What is a Closed Deck Block and why do I need it?

The factory Subaru EJ25 case is referred to as a semi-open (or semi-closed) deck. The block is essentially an open deck with 3 narrow supports tying in the main case to the tops of the sleeves. This feature was a slight improvement over the EJ20 case, which was a completely open deck with no support. The purpose of the deck supports is to keep the sleeve from moving. While conceptually this is an improvement, the reality is that it simply isn’t enough for a high horsepower Subaru. The weakest point of the sleeve is still left open and unaddressed.

Included:

(x1) IAG Stage 4 Tuff Closed Deck converted EJ25 Case Halves (Starts with brand new OEM case 99.5mm bore) *Bore and hone additional and required before final assembly.

(x8) Threaded case bolt plugs

IAG Fire-Lock receiver groove machining, latest solution to prevent head gasket failure on high horsepower and high boost Subaru's - *IAG Fire-Lock head gaskets required

(x1) Machined case to fit 14mm head studs - *Head studs sold separately

Additional Options:

(x1) IAG / ARP Spec 14mm head studs, nuts, and washers - $550

Head Gasket Required:

*IAG Fire-Lock .051" Head Gaskets with IAG-Spec Alloy Ring Set* PN# IAG-ENG-1740

If using on 2002-05 Subaru EJ20 2.0L WRX additional modifications and parts are required.

Please Note: Overbore must be performed (99.75mm is the preferred bore) before assembly!

*Attention: Special note about using ARP Case Bolts - IAG recommends line honing the case when using ARP Case Bolts to remove any distortion created by the hardware. IAG installs ARP CASE BOLTS with 30W engine oil using OEM SUBARU torque specs and procedures. Other torque specs and lubricants may lead to case distortion damage.



Center an Image using text align center

The car parts world is still feeling the impact from the Covid buying spree and shut down. Thanks to amazing customers like you, we are currently experiencing a high volume of orders and shipping may be delayed. DRP remains fully committed to pursuing the completion of your purchase within a reasonable manner under the current circumstances. You can always contact our customer service via email with questions, or to check for availability!

Please note: Not all orders will experience a delay, however, we want to continue to be as open and transparent as possible should you experience a longer than average order processing time. As a small business, your continued support means the world to us and your choice to shop with us has made a huge impact and we greatly appreciate you and your understanding!

This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov