IAG Performance Stage 2 Tuff 2.5L Subaru Short Block for WRX, STI, LGT, FXT

Regular Price
$4,199.99
Sale Price
$4,199.99
Regular Price
Sold Out

Snap Logo Lease for as low as $/week Learn More
Unit Price
translation missing: en.general.accessibility.unit_price_separator 
Shipping calculated at checkout.
SKU IAG-ENG-1213

The IAG Stage 2 Tuff short block starts with new Subaru 2.5L EJ25 engine case halves that are bored and honed to 99.75 on our in-house Sunnen SV-30 the most advanced automotive cylinder hone available. IAG's in-house honing process is able to set piston to wall clearances tighter for a quieter running engine. The short block is measured and assembled using a new 2017+ Subaru 2.5L nitride treated STI crankshaft that is matched to ACL or King race main bearings. Next, IAG-Spec Tuff H-Beam rods with ARP Rod Bolts are utilized to increase the power rating slightly at the expense of being slightly heavier. The connecting rods are matched to ACL or King race rod bearings. The case halves are sealed with new OEM main case bolts and sealant. Finally, IAG-Spec JE 99.75mm Forged Pistons are added to finish off the short block.

Stage 2 Tuff Short Block Includes:

  • Case Halves -Brand new Subaru OEM case halves, bored and honed to 99.75mm.
  • Pistons -IAG-Spec JE 99.75mm Forged Pistons, Ring Set, .210" 9310 Steel Pins, Clips, (Perfect Skirt Coating and Offset Wrist Pin)
  • Connecting Rods -IAG-Spec Tuff H-Beam / ARP2000 Rod Bolts.
  • Rod / Main Bearings -ACL or King Race bearings.
  • Crankshaft -Standard New Subaru Nitride Treated 2017+ STI Crankshaft.
  • Case / Main Bolts -Standard FHI Subaru case bolts.


Additional Options Available:

  • Oil Pump - IAG Stage 2 CNC Ported 11mm EJ Oil Pump or Subaru JDM 12mm High Volume Oil Pump
  • IAG Oil Pickup - Upgraded oil pickup featuring heavy gauge steel tubing, 2 point bracket & mesh filter
  • IAG Oil Baffle - Upgraded oil control baffle and windage tray
  • IAG Oil Pickup & Baffle Set - Upgraded oil pickup, oil control baffle, and windage tray
  • Hardware / Seals -OEM cover and seal kit


Compression Ratio:

  • 8.5:1 on D Cylinder Heads (EJ255)
  • 8.2:1 on B, V and W EJ257 Heads with standard thickness gasket.


Power: The IAG Stage 2 Tuff Short Block has a power output rating of 600BHP.

*All IAG short blocks are balanced and blueprinted.

Please review the PDF document below regarding installation, break-in procedures and warranty information.

 PDF After Sale Document - Contains Shipping, Engine Care and Warranty Information


Fitment

  • 2002-2014 Subaru WRX
  • 2004-2020 Subaru STI
  • 2005-2011 Subaru Legacy GT
  • 2008-2013 Subaru Forester XT
  • 2005-2006 Saab 9-2X Aero
  • 2004-2006 Subaru Baja Turbo
  • 2009-2010 Subaru Impreza 2.5 GT

The IAG Stage 2 Tuff short block starts with new Subaru 2.5L EJ25 engine case halves that are bored and honed to 99.75 on our in-house Sunnen SV-30 the most advanced automotive cylinder hone available. IAG's in-house honing process is able to set piston to wall clearances tighter for a quieter running engine. The short block is measured and assembled using a new 2017+ Subaru 2.5L nitride treated STI crankshaft that is matched to ACL or King race main bearings. Next, IAG-Spec Tuff H-Beam rods with ARP Rod Bolts are utilized to increase the power rating slightly at the expense of being slightly heavier. The connecting rods are matched to ACL or King race rod bearings. The case halves are sealed with new OEM main case bolts and sealant. Finally, IAG-Spec JE 99.75mm Forged Pistons are added to finish off the short block.

Stage 2 Tuff Short Block Includes:

  • Case Halves -Brand new Subaru OEM case halves, bored and honed to 99.75mm.
  • Pistons -IAG-Spec JE 99.75mm Forged Pistons, Ring Set, .210" 9310 Steel Pins, Clips, (Perfect Skirt Coating and Offset Wrist Pin)
  • Connecting Rods -IAG-Spec Tuff H-Beam / ARP2000 Rod Bolts.
  • Rod / Main Bearings -ACL or King Race bearings.
  • Crankshaft -Standard New Subaru Nitride Treated 2017+ STI Crankshaft.
  • Case / Main Bolts -Standard FHI Subaru case bolts.


Additional Options Available:

  • Oil Pump - IAG Stage 2 CNC Ported 11mm EJ Oil Pump or Subaru JDM 12mm High Volume Oil Pump
  • IAG Oil Pickup - Upgraded oil pickup featuring heavy gauge steel tubing, 2 point bracket & mesh filter
  • IAG Oil Baffle - Upgraded oil control baffle and windage tray
  • IAG Oil Pickup & Baffle Set - Upgraded oil pickup, oil control baffle, and windage tray
  • Hardware / Seals -OEM cover and seal kit


Compression Ratio:

  • 8.5:1 on D Cylinder Heads (EJ255)
  • 8.2:1 on B, V and W EJ257 Heads with standard thickness gasket.


Power: The IAG Stage 2 Tuff Short Block has a power output rating of 600BHP.

*All IAG short blocks are balanced and blueprinted.

Please review the PDF document below regarding installation, break-in procedures and warranty information.

 PDF After Sale Document - Contains Shipping, Engine Care and Warranty Information


Fitment

  • 2002-2014 Subaru WRX
  • 2004-2020 Subaru STI
  • 2005-2011 Subaru Legacy GT
  • 2008-2013 Subaru Forester XT
  • 2005-2006 Saab 9-2X Aero
  • 2004-2006 Subaru Baja Turbo
  • 2009-2010 Subaru Impreza 2.5 GT


This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov