Driveshaft Shop 1-Piece 6-Speed Manual Carbon Fiber Driveshaft Subaru WRX 2015+

Regular Price
$1,349.98
Sale Price
$1,349.98
Regular Price
Sold Out

Snap Logo Lease for as low as $/week Learn More
Unit Price
translation missing: en.general.accessibility.unit_price_separator 
Shipping calculated at checkout.
SKU SUSH18-C

The 1-piece driveshaft for the 2015+ Subaru WRX is a complete 2.75" Carbon Fiber shaft. The 1-piece carbon shaft features larger, replaceable u-joints and can handle about 850WHP and 180 MPH. We had the tubing custom wound with a high modulus fiber to ensure the strength while making it small enough to clear everything under the car. All of the factory shields, plates and covers can be used without any alteration to the car at all. The ends are made from 6061-T6 aluminum and that shaft weighs a mere 14.5 lbs. Not only will the car feel more responsive but it will also make a noticeable difference on the noise level in the car. By removing the factory 2-piece shaft and installing a single shaft, the car will feel more responsive due to the lighter weight of the shaft and also the fact that the hanger bearing is not moving up and down during acceleration.

  • 2.75" in diameter
  • 1-piece design
  • Carbon fiber construction
  • Approximately 1/2 the weight of the factory driveshaft
  • Reduces rotational mass for improved acceleration and performance
  • Larger, replaceable u-joints
  • Capable of handling 850 WHP
  • Custom wound with a high modulus fiber to ensure the strength
  • FOR MANUAL TRANSMISSION MODELS

The 1-piece driveshaft for the 2015+ Subaru WRX is a complete 2.75" Carbon Fiber shaft. The 1-piece carbon shaft features larger, replaceable u-joints and can handle about 850WHP and 180 MPH. We had the tubing custom wound with a high modulus fiber to ensure the strength while making it small enough to clear everything under the car. All of the factory shields, plates and covers can be used without any alteration to the car at all. The ends are made from 6061-T6 aluminum and that shaft weighs a mere 14.5 lbs. Not only will the car feel more responsive but it will also make a noticeable difference on the noise level in the car. By removing the factory 2-piece shaft and installing a single shaft, the car will feel more responsive due to the lighter weight of the shaft and also the fact that the hanger bearing is not moving up and down during acceleration.

  • 2.75" in diameter
  • 1-piece design
  • Carbon fiber construction
  • Approximately 1/2 the weight of the factory driveshaft
  • Reduces rotational mass for improved acceleration and performance
  • Larger, replaceable u-joints
  • Capable of handling 850 WHP
  • Custom wound with a high modulus fiber to ensure the strength
  • FOR MANUAL TRANSMISSION MODELS


This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov