Driveshaft Shop 1-Piece 2.75" Carbon Fiber Driveshaft Scion FR-S 2013-2016 / Subaru BRZ 2013+ / Toyota 86 2017+

Regular Price
$1,480.48
Sale Price
$1,480.48
Regular Price
Sold Out

Snap Logo Lease for as low as $/week Learn More
Unit Price
translation missing: en.general.accessibility.unit_price_separator 
Shipping calculated at checkout.
SKU TOSH86-C

The 1-piece driveshaft for the 2012 Scion FR-S / Subaru BRZ / Toyota GT86 is a complete 2.75'' Carbon Fiber shaft that is approximately 1/2 the weight of the factory 2-piece driveshaft. The 1-piece carbon shaft features larger, replaceable u-joints and can handle about 850WHP. We had the tubing custom wound with a high modulus fiber to ensure the strength while making it small enough to clear everything under the car. All of the factory shields, plates and covers can be used without any alteration to the car at all. The ends are made from 6061-T6 aluminum and that shaft weighs a mere 12.2lbs. Not only will the car feel more responsive but it will also make a noticeable difference on the noise level in the car.

By removing the factory 2-piece shaft and installing a single shaft, the car will feel more responsive due to the lighter weight of the shaft and also the fact that the hanger bearing is not moving up and down during acceleration. Available for most popular motor/trans combinations.

Please Note: May have interference with aftermarket short throw shifters.

  • Made using durable and lightweight carbon fiber materials
  • 1/2 the weight of the factory 2-piece driveshaft
  • Features replaceable and greaseable u-joints
  • Rated to 850 WHP
  • Improved the response due to the lighter materials
  • All of the factory shields, plates, and covers can be used without any alteration to the car at all
  • Ends are made from 6061-T6 aluminum

    The 1-piece driveshaft for the 2012 Scion FR-S / Subaru BRZ / Toyota GT86 is a complete 2.75'' Carbon Fiber shaft that is approximately 1/2 the weight of the factory 2-piece driveshaft. The 1-piece carbon shaft features larger, replaceable u-joints and can handle about 850WHP. We had the tubing custom wound with a high modulus fiber to ensure the strength while making it small enough to clear everything under the car. All of the factory shields, plates and covers can be used without any alteration to the car at all. The ends are made from 6061-T6 aluminum and that shaft weighs a mere 12.2lbs. Not only will the car feel more responsive but it will also make a noticeable difference on the noise level in the car.

    By removing the factory 2-piece shaft and installing a single shaft, the car will feel more responsive due to the lighter weight of the shaft and also the fact that the hanger bearing is not moving up and down during acceleration. Available for most popular motor/trans combinations.

    Please Note: May have interference with aftermarket short throw shifters.

    • Made using durable and lightweight carbon fiber materials
    • 1/2 the weight of the factory 2-piece driveshaft
    • Features replaceable and greaseable u-joints
    • Rated to 850 WHP
    • Improved the response due to the lighter materials
    • All of the factory shields, plates, and covers can be used without any alteration to the car at all
    • Ends are made from 6061-T6 aluminum


      This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov