Driveshaft Shop 1-Piece 2.75'' Carbon Fiber Automatic Driveshaft Scion FR-S / Subaru BRZ / Toyota 86

Regular Price
$1,480.48
Sale Price
$1,480.48
Regular Price
Sold Out

Snap Logo Lease for as low as $/week Learn More
Unit Price
translation missing: en.general.accessibility.unit_price_separator 
Shipping calculated at checkout.
SKU TOSH87-C

The 1-piece driveshaft for the Scion FR-S / Subaru BRZ / Toyota GT86 is a complete 2.75'' Carbon Fiber shaft that is approximately 1/2 the weight of the factory 2-piece driveshaft. The 1-piece carbon shaft features larger, replaceable u-joints and can handle about 800WHP. We had the tubing custom wound with a high modulus fiber to ensure the strength while making it small enough to clear everything under the car. All of the factory shields, plates and covers can be used without any alteration to the car at all. The ends are made from 6061-T6 aluminum and that shaft weighs a mere 12.2lbs. Not only will the car feel more responsive but it will also make a noticeable difference on the noise level in the car.

By removing the factory 2-piece shaft and installing a single shaft, the car will feel more responsive due to the lighter weight of the shaft and also the fact that the hanger bearing is not moving up and down during acceleration. Available for most popular motor/trans combinations.

  • 2.75" in diameter
  • 1-piece design
  • Carbon fiber construction
  • Approximately 1/2 the weight of the factory driveshaft
  • Reduces rotational mass for improved acceleration and performance
  • Larger, replaceable u-joints
  • Capable of handling 850 WHP
  • Custom wound with a high modulus fiber to ensure the strength
  • FOR AUTOMATIC TRANSMISSION MODELS

    The 1-piece driveshaft for the Scion FR-S / Subaru BRZ / Toyota GT86 is a complete 2.75'' Carbon Fiber shaft that is approximately 1/2 the weight of the factory 2-piece driveshaft. The 1-piece carbon shaft features larger, replaceable u-joints and can handle about 800WHP. We had the tubing custom wound with a high modulus fiber to ensure the strength while making it small enough to clear everything under the car. All of the factory shields, plates and covers can be used without any alteration to the car at all. The ends are made from 6061-T6 aluminum and that shaft weighs a mere 12.2lbs. Not only will the car feel more responsive but it will also make a noticeable difference on the noise level in the car.

    By removing the factory 2-piece shaft and installing a single shaft, the car will feel more responsive due to the lighter weight of the shaft and also the fact that the hanger bearing is not moving up and down during acceleration. Available for most popular motor/trans combinations.

    • 2.75" in diameter
    • 1-piece design
    • Carbon fiber construction
    • Approximately 1/2 the weight of the factory driveshaft
    • Reduces rotational mass for improved acceleration and performance
    • Larger, replaceable u-joints
    • Capable of handling 850 WHP
    • Custom wound with a high modulus fiber to ensure the strength
    • FOR AUTOMATIC TRANSMISSION MODELS


      This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov